FORGE MOTORSPORT HIGH FLOW VALVE

Note: This will not fit RS3 8V models with DNWA engine code.

This valve kit is an evolution of the FMARSDV dump valve Forge Motorsport market for the 8P chassis RS3. It was developed for those who have tuned, or plan to tune, their 8S chassis Audi TTRS or 8V chassis Audi RS3 in excess of 450hp. Audi have seen fit to not change the design of the OEM dump valve from the previous RS3, so the same issues are carried over to the new 8V chassis, namely it was observed that cars over 450bhp were randomly getting errors from the stock solenoid dump valve not functioning. Whilst the stock valve will operate as designed, with the boost level necessary for 450bhp the stock valve couldn’t move the volume of air it needed to, so the ECU was seeing too great a positive boost in the MAP readings between gear changes and assuming the stock valve wasn’t functioning correctly.

Forge Motorsport looked closely at this issue, and noted that there would be no real fix for this as the size of the hole for the valve is too small in the stock elbow. They decided that they would re-design and produce our own elbow, allowing a much larger DV port, which in turn would allow fitment of a larger valve to take advantage of it. Forge Motorsport also improved the internal flow of the elbow and removed restriction within the valve. The elbow design has been changed by Audi to accommodate a different throttle body, so our design has changed too.

Delivery time: Usually 5 working days